Configuring IPv6 on a Public Cloud instance

Learn how to configure an IPv6 address on a Public Cloud instance.

Internet Protocol version 6 (IPv6) is the latest version of Internet Protocol (IP). It is designed to solve the long-anticipated exhaustion of IPv4 addresses by using 128-bit addresses rather than the standard 32-bit IPv4 addresses.

Each Public Cloud instance is delivered with an IPv4 address and an IPv6 address.

Info

Floating IP and Gateway currently do not support IPv6. You can only use IPv6 with instances in Public Mode.

Requirements

A Public Cloud instance (any model)
Administrative access (root) via SSH or remote desktop (Windows) to your server
A basic understanding of networking

OVHcloud Control Panel Access

Direct link: Public Cloud Projects
Navigation path: Public Cloud > Select your project

Instructions

The following sections contain configurations for the distributions we currently offer, as well as the most commonly used distributions/operating systems. The first step is always to log in to your server via SSH or a GUI login session (RDP for a Windows instance).

Warning

NOTE: On recent Linux distributions, IPv6 is configured by default on Public Cloud instances. Be sure to check your OS configuration file before making any changes.

Glossary

Here is a short glossary of the terms used in this tutorial:


Glossary	Description
YOUR_IPV6	The IPv6 address assigned to your service.
IPV6_PREFIX	The prefix of your IPv6 block (e.g. 2607:5300:60:62ac::/128 -> netmask = 128)
IPV6_GATEWAY	The gateway of your IPv6 block.

Retrieve your network information

In your Public Cloud project, click on Instances in the left-hand menu.

Click the more options ... button next to the corresponding instance and choose Instance details.

Instances more options

All the information you need is in the Networks section.

General information IPv - step 6

Examples of persistent configuration

Info

Examples

The information below is provided as an example.
Since you are the admin of your services, you will need to adapt the information to match your distribution or operating system.

Warning

NOTE: Before modifying a configuration file, always create a backup of the original.

First of all, connect to your instance via SSH.

Tip

Select the tab corresponding to your operating system.

Debian (excluding Debian 12)

Ubuntu and Debian 12

RedHat / CloudLinux / Rocky Linux (8 & 9) / AlmaLinux (8 & 9)

Fedora / Rocky Linux (10) / AlmaLinux 10

Windows

Debian (excluding Debian 12)

By default, the configuration files are located in /etc/network/interfaces.d/.

The best practice is to create a separate configuration file in the /etc/network/interfaces.d/ directory to configure IPV6. In our example, our file is called 51-cloud-init-ipv6:

sudo nano /etc/network/interfaces.d/51-cloud-init-ipv6

This separates the IPv6 configuration and lets you revert changes easily if needed.

Add the following lines to the file. Replace the generic elements (i.e. YOUR_IPV6, IPV6_PREFIX and IPV6_GATEWAY) as well as the network interface (if your server is not using eth0) with your specific values:

iface eth0 inet6 static
address YOUR_IPV6
netmask IPV6_PREFIX
post-up /sbin/ip -6 route add IPV6_GATEWAY dev eth0
post-up /sbin/ip -6 route add default via IPV6_GATEWAY dev eth0
pre-down /sbin/ip -6 route del default via IPV6_GATEWAY dev eth0
pre-down /sbin/ip -6 route del IPV6_GATEWAY dev eth0

Configuration example

iface eth0 inet6 static
address 2607:5300:201:abcd::7c5
netmask 128
post-up /sbin/ip -6 route add 2607:5300:201:abcd::1 dev eth0
post-up /sbin/ip -6 route add default via 2607:5300:201:abcd::1 dev eth0
pre-down /sbin/ip -6 route del default via 2607:5300:201:abcd::1 dev eth0
pre-down /sbin/ip -6 route del 2607:5300:201:abcd::1 dev eth0

Then restart your network service with one of the following commands:

sudo service networking restart

sudo systemctl restart networking

Ubuntu and Debian 12

The network configuration files are located in the /etc/netplan/ directory.

The best practice is to create a separate configuration file in the /etc/netplan/ directory to configure IPV6. In our example, our file is called 51-cloud-init-ipv6.yaml:

sudo nano /etc/netplan/51-cloud-init-ipv6.yaml

This separates the IPv6 configuration and lets you revert changes easily if needed.

Add the following lines to the file. Replace the generic elements (i.e., YOUR_IPV6, IPV6_PREFIX, and IPV6_GATEWAY) as well as the network interface (if your server is not using eth0) with your specific values:

network:
    version: 2
    ethernets:
        eth0:
            dhcp6: no
            match:
              name: eth0
            addresses:
              - YOUR_IPV6/IPv6_PREFIX
            routes:
              - to: ::/0
                via: IPv6_GATEWAY

It is important to respect the alignment of each element in this file as represented in the example above. Do not use the tab key to create your spacing. Only the space key is needed.

Configuration example

network:
    version: 2
    ethernets:
        eth0:
            dhcp6: no
            match:
              name: eth0
            addresses:
              - 2607:5300:201:abcd::7c5/128
            routes:
              - to: ::/0
                via: 2607:5300:201:abcd::1

You can test your configuration using this command:

sudo netplan try

If it is correct, apply it using the following command:

sudo netplan apply

RedHat / CloudLinux / Rocky Linux (8 & 9) / AlmaLinux (8 & 9)

The network configuration files are located in the /etc/sysconfig/network-scripts/ directory. We recommend that you start by backing up the relevant configuration file.

In our example, our file is called ifcfg-eth0, so we make a backup of the ifcfg-eth0 file using the following commands. Remember to replace eth0 with your actual interface if necessary.

cd /etc/sysconfig/network-scripts/
sudo mkdir backup
sudo cp ifcfg-eth0 backup/ifcfg-eth0

You will then be able to revert the changes, using the commands below:

sudo rm -f /etc/sysconfig/network-scripts/ifcfg-eth0
sudo cp /etc/sysconfig/network-scripts/backup/ifcfg-eth0 /etc/sysconfig/network-scripts/ifcfg-eth0

Then we edit the ifcfg-eth0 file, adding only the lines for the IPv6 configuration of the server. Replace the generic elements (i.e., YOUR_IPV6, IPV6_PREFIX, and IPV6_GATEWAY) with your specific values.

IPV6INIT=yes
IPV6ADDR=YOUR_IPV6/IPV6_PREFIX
IPV6_DEFAULTGW=IPV6_GATEWAY

We have omitted the IPv4 configuration to avoid confusion, but the IPv6 configuration is made in the same configuration file.

Configuration example

IPV6INIT=yes
IPV6ADDR=2607:5300:201:abcd::7c5/128
IPV6_DEFAULTGW=2607:5300:201:abcd::1

Restart the network interface using one of the following commands:

sudo service networking restart

sudo systemctl restart networking

Fedora / Rocky Linux (10) / AlmaLinux (10)

The network configuration file is located in the /etc/NetworkManager/system-connections/. We recommend that you start by backing up the relevant configuration file.

In our example, our file is called cloud-init-eth0.nmconnection, so we make a copy of the cloud-init-eth0.nmconnection file using the following commands. Remember to replace eth0 with your actual interface if necessary.

cd /etc/NetworkManager/system-connections/
sudo mkdir backup
sudo cp cloud-init-eth0.nmconnection backup/cloud-init-eth0.nmconnection

Then we edit the cloud-init-eth0.nmconnection file, adding only the lines for the IPv6 configuration of the server. Replace the generic elements (i.e., YOUR_IPV6, IPV6_PREFIX, and IPV6_GATEWAY) with your specific values.

If we assume that your interface is eth0, the configuration should look like this:

[ipv6]
method=manual
may-fail=true
address1=YOUR_IPV6/IPV6_PREFIX
route1=::/0,IPV6_GATEWAY

We have omitted the IPv4 configuration to avoid confusion, but the IPv6 configuration is made in the same configuration file.

Configuration example

[ipv6]
method=manual
may-fail=true
address1=2607:5300:201:abcd::7c5/128
route1=::/0,2607:5300:201:abcd::1

Diagnostic

Have you configured your IPv6, but found that nothing works?

There is a simple operation to determine whether the error is in your configuration, or on the OVHcloud network.

Firstly, put your instance into rescue-pro mode.

Next, use the template commands below to configure your IP non-persistently, replacing ‘YOUR_IPV6’, ‘IPV6_PREFIX’, etc. with your own details:

ip addr add YOUR_IPV6/IPV6_PREFIX dev eth0
ip -6 route add IPV6_GATEWAY dev eth0
ip -6 route add default via IPV6_GATEWAY dev eth0

Test your network again via a ping6, for example:

ping6 ipv6.google.com

If your instance responds, there is likely an error in one of the steps taken for your initial configuration.

In any case, please feel free to reach out to our support team with the elements tested above, and we can perform an analysis on our end.

Go further

Browse all the Networking guides.

Browse the rest of the OVHcloud US documentation for guides on our other products and services.

Learn more about Public Cloud Network on the OVHcloud US website.